About us
About us
Company news
Industry information
Honorary certificate

Company news

Linking piece of white latex operation method and application scope

The choice of cold press machine:


The specifications of the common cold press (refers to the maximum pressure) : 40 t, 50 t, 80 t, 100 t


Operation method:


1. The surface of wood processing, make the wood surface free of oil, dirt and other impurities. When bonding surface must level off the adhesive can fully contact.


2. Wood water law should be controlled in 8-15%, too high too low will affect the bonding quality.


3. The opening time: 2-5 minutes, the shorter the better, general guarantee in the adhesive solution before film. Suitable amount of coating should be uniform, glue quantity is 180-180 grams per square meter


4. Pressure time: cold press 2 to 8 hours, depending on base material moisture content and temperature conditions, the pressure, the pressure should be enough, pressurized wants even, should be 2 hours, pressure to achieve better bonding effect, it is best to 24 hours after pressure relief for processing.


5. In view of some special materials can be used mixed with some resin, enhance the bonding effect





Scope of application:


Mainly applicable to fire prevention board, fiber cement board, density board, gypsum board, used in furniture, cabinets, doors, decorative materials, etc.